STANDARD WALL APPLICATION
Frames are knockdown (KD) field assembled type or welded unit type. Head and jamb
members of KD frames have diecut mitered corners that interlock rigidly when field
assembled. Integral door stops are 5/8" high. Jambs are sized to suit wall
applications. Twist-in anchors are available for new masonry, wood stud, metal stud or
existing opening wall conditions (indicate which). Floor anchors or extra jamb anchors are
provided to anchor sill. Welded-in jamb or floor anchors are also available.
SLIP-ON DRYWALL APPLICATION
Frames are knockdown, field assembled type. Components have diecut mitered corners that
interlock when field assembled. Double rabbet profiles are sized to fit 3 popular wall
thicknesses. Integral door stops are 5/8" high and frame faces are 2".
Adjustable, compression type anchors are welded to jambs and allow frame installation,
plumbing and squaring after wallboard is applied (to adjust anchors use either a slotted
head Phillips head screw driver screw is flush with soffit at access hole).
Components have backbend-returns that protect the wall surface during installation. Sill
anchoring is by means of screws through dimpled holes in faces
welded on sill strap
anchors are also available (optional).